


52041 Badia Al Pino
Arezzo - Italy

Mail info@italimpianti.it
These furnaces are ideal to melt precious PGM metals. All ITALIMPIANTI ORAFI induction melting furnaces are fitted with static frequency converters.
A high efficiency of the electrical output that drastically reduces electricity consumption while maintaining the production rate thanks to frequency conversion system we have used.
The modular construction of the electric circuit board greatly simplifies maintenance operations and guarantees high reliability even in the most demanding working conditions.
The highest technical standards used to design the inductors along with the modular construction and the use of only high quality materials guarantee maximum production even in the worst conditions.
MAIN ADVANTAGES
These furnaces offer a wide array of advantages:
TECHNICAL DATA | FIM/8Pt | FIM/15Pt | FIM/30Pt | FIM/45Pt |
Power supply | Three-phase | Three-phase | Three-phase | Three-phase |
Absorbed power kW | 8 | 15 | 30 | 45 |
Power output kW | 7.5 | 14.7 | 29.3 | 44.1 |
Capacity of zirconia crucible (kg Pt) | 0.5 | 1-4 | 4-22 | 4-22 |
Capacity of zirconium silicate crucible (kg Pt) | - | 1-3 | 4-21 | 4-21 |
Melting time at max load (minutes) from cold | 15 | 17 | 18 | 13 |
Temperature measurement | T/O | T/O | T/O | T/O |
Required cooling power (frig/h) | 3800 | 10500 | 21000 | 25000 |
Chiller for 8 hours working | FRIGO 15 | FRIGO 51 | FRIGO 121 | FRIGO 121 |
On board pump | Yes | Yes | Yes | Yes |
Minimum flow rate to coil @25 °C (l/min) |
20 | 20 | 30 | 30 |
Dimensions conv/Tilt (mm) |
470x1300x1550 | 800x1500x1730 | 1500x1200x1980 1300x1200x1770 |
1500x1200x1980 1300x1200x1770 |
Weight | 310 Kg | 550 Kg | 1550 Kg | 1700 Kg |